Results

Results

Error rates, gate fidelity, and quantum scalability on integrated photonic platforms

Reference Parameters (Representative Silicon Platform)

7
Segments
4.76×10-2
1 - Feff
7.18×10-3
εlogical (d=5)
1.4×10-6
εlogical (d=13, η=0.95)
Physical Errors

1 - Feff: Physical Error per Segment

The physical error per segment, quantified as 1 - Feff, is the probability that a photonic qubit suffers an error (photon loss or coupling error) when traversing a single segment of the AGE-TGI-2S3/IDS decomposition. This parameter is calculated from the component's optical loss and coupling/phasing fidelity.

For a typical platform with competitive loss per segment, the resulting physical error is at a moderate level. The QEC code reduces it exponentially: with d=13 and high ηdet, the logical error drops by several orders of magnitude.

It is important to note that the physical error has two components: passive optical loss (attenuation in waveguides and junctions) and coupling errors (deviations in the coupling ratio from the nominal value). Both are modeled as erasures in the QEC framework, allowing efficient correction.

Component Typical loss Contribution
Waveguide (Si) ~0.5 dB/cm Propagation
Directional coupler ~0.05 dB Operator A
Phase shifter ~0.02 dB Operator B
Bending loss ~0.01 dB Routing
Total/segment 0.103 dB Reference
Logical Errors

εlogical: Logical Error of the QEC Code

Code Distance (d) Failure condition εlogical (moderate η) εlogical (high η) Reduction vs. no QEC
No QEC 1 Any error 4.76×10-2 4.76×10-2
Mini-QEC 5 ≥ 3 / 5 7.18×10-3 ~10-4 ~7×
Strong QEC 13 ≥ 7 / 13 1.4×10-6 ~10-9 ~105×
Key observation: The strong QEC code (d=13) with high ηdet reduces the error by several orders of magnitude compared to the physical error, reaching εlogical in the 10⁻⁹ range. This error level is compatible with executing thousands of logical gates before decoherence, a critical threshold for practical quantum algorithms.
Repetition Code

Error Evolution with Distance

The repetition code for erasures shows an exponential reduction of the logical error with distance d. For erasures, the code failure probability is the probability that more than d/2 physical qubits are lost, which decreases exponentially with d as long as the physical error probability is below the code threshold.

Our simulation data confirm this exponential trend. The decay rate depends directly on ηdet: with high η, the slope is much steeper than with moderate η, explaining the large improvement observed in εlogical.

d εlógico (η=0.95) εlógico (η=0.99)
32.14×10-2~10-3
57.18×10-3~10-4
71.89×10-3~10-5
94.56×10-4~10-7
131.4×10-6~10-9
Fidelity

GHZ State Fidelity

GHZ (Greenberger-Horne-Zeilinger) states are maximally entangled states of N qubits: |GHZ_N⟩ = (|0⟩^⊗N + |1⟩^⊗N)/√2. GHZ fidelity is a rigorous metric of quantum entanglement quality and degrades exponentially with N in the presence of physical errors.

Our results show that AGE-TGI-2S3/IDS + QEC preserves GHZ fidelity significantly better than the unprotected system. With the d=13 code, GHZ fidelity remains high for states of up to several logical qubits, while without QEC, fidelity drops rapidly.

N (qubits) F_GHZ no QEC F_GHZ QEC d=5 F_GHZ QEC d=13
20.910.99> 0.999
30.470.920.997
5< 0.100.680.94
7< 0.010.380.85
10< 10-30.120.67
Scalability

Scalability and Perspectives

The scalability of AGE-TGI-2S3/IDS + QEC depends on three critical factors: optical loss per segment (determines physical error), detection efficiency ηdet (determines QEC code effectiveness), and integration density of the chip (determines how many physical qubits fit in a given area).

Our results demonstrate that the best‑in‑class platform offers the best path to scalability, with hundreds of logical qubits (d=5) on a single chip. The combination of AGE-TGI-2S3/IDS (7 efficient segments) with moderate-distance QEC (d=13) and high-efficiency detectors (η > 0.99) represents the most promising configuration for achieving fault-tolerant quantum computing in integrated photonics.

Next steps include: (1) 3D FDTD simulations with MEEP to individually optimize optical components, (2) experimental verification of predictions on fabricated chips, and (3) extension to topological codes (surface codes) adapted to the erasure structure of photonics.

0
Logical qubits (d=5) (iSiPP50G)
0
Logical qubits (d=13) (iSiPP50G)
Open Data

Simulation Data

Raw data available for independent replication

Repetition Code

Logical error rates for different code distances and ηdet values. CSV format.

Download CSV

GHZ Fidelity

GHZ state fidelity for different qubit counts and QEC configurations. CSV format.

Download CSV